Advanced settings
You can invert the signal of the digital output using parameter p0748.
For more information, please see the parameter list and the function diagrams 2230 f of the
List Manual.
Using switchable terminals as digital outputs
Converter with the CU250S-2 Control Units
Operating Instructions, 04/2018, FW V4.7 SP10, A5E31759476B AG
Overview of the manuals (Page 519)
Advanced commissioning
6.3 Adapt the default setting of the terminal strip
In the inverter factory setting, the
switchable terminals are active as
digital inputs.
To use a terminal that can be
switched over as a digital output,
set the corresponding bit of param‐
eter p0728.x = 0.
169