Changes In The Current Edition - Siemens SINAMICS G120 Operating Instructions Manual
Low voltage inverters
built-in units with cu250s-2 control units and
encoder evaluation
Hide thumbs
Also See for SINAMICS G120:
- List manual (1256 pages) ,
- Manual (732 pages) ,
- Operating instructions manual (550 pages)
Table of Contents
Changes in the current edition
Essential changes with respect to Edition 09/2017
New hardware
● PM240-2 Power Module, FSG
(Page 62)
New functions
Corrections
● Article number of the PM240-2 PT Power Module, 132 kW, corrected.
● Dimensions of the PM240-2 Power Module corrected.
(Page 62)
● Setting the feedback signal for the line contactor control corrected.
● SSI encoder and Endat 2.1 encoder are permissible for speed control.
● PROFIdrive control word 2, bit 8 corrected
PROFIdrive status word 2, bit 7 corrected
Revised descriptions
● Only commissioning using the Startdrive PC-based tool is described. Commissioning with
STARTER has been removed.
Exceptions: Write and know-how protection.
You can find information on commissioning with STARTER on the Internet:
en/view/109751322)
Converter with the CU250S-2 Control Units
Operating Instructions, 04/2018, FW V4.7 SP10, A5E31759476B AG
Power Module with IP20 degree of protection (Page 35)
Dimensioned drawings, drilling dimensions for the PM240-2 Power Module, IP20
Specific technical data, 400 V inverters (Page 457)
Specific technical data, 690 V inverters (Page 467)
Firmware version 4.7 SP10 (Page 481)
Technical data, PM240-2 Power Modules (Page 445)
Dimensioned drawings, drilling dimensions for the PM240-2 Power Module, IP20
Line contactor control (Page 355)
Installing encoders (Page 121)
Telegrams (Page 184)
Operating Instructions, 09/2017 Edition
(https://support.industry.siemens.com/cs/ww/
3
Table of Contents
