Dynojet POWER COMMANDER V Installation Instructions Manual
  1. Manuals
  2. Brands
  3. Dynojet Manuals
  4. Motorcycle Accessories
  5. Power commander V
  6. Installation instructions manual
Dynojet POWER COMMANDER V Installation Instructions Manual

Dynojet POWER COMMANDER V Installation Instructions Manual

For kawasaki kx250f 2013
Hide thumbs Also See for POWER COMMANDER V:
1
2
3
4
5
6

Quick Links

See also: Installation Instructions & Owner's Manual, Instruction and Installation Manual
2013 Kawasaki KX250F
I n s t a l l a t i o n I n s t r u c t i o n s
PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION
I17-045
www.powercommander.com
2191 Mendenhall Drive North Las Vegas, NV 89081 (800) 992-4993 www.powercommander.com
PARTS LIST
1
Power Commander
1
USB Cable
1
CD-ROM
1
Installation Guide
2
Power Commander Decals
2
Dynojet Decals
2
Velcro
1
Alcohol swab
THE IGNITION MUST BE TURNED
OFF BEFORE INSTALLATION!
YOU CAN ALSO DOWNLOAD THE
POWER COMMANDER SOFTWARE AND
LATEST MAPS FROM OUR WEB SITE AT:
www.powercommander.com
2013 Kawasaki KX250F PCV - 1
loading

Related Manuals for Dynojet POWER COMMANDER V

Summary of Contents for Dynojet POWER COMMANDER V

  • Page 1 2013 Kawasaki KX250F Installation Guide I n s t a l l a t i o n I n s t r u c t i o n s Power Commander Decals Dynojet Decals Velcro Alcohol swab THE IGNITION MUST BE TURNED OFF BEFORE INSTALLATION!

  • Page 2: Usb Connection

    POWER COMMANDER V INPUT ACCESSORY GUIDE ACCESSORY INPUTS Map - The PCV has the ability to hold 2 different base maps. You can switch on the fly between these two base maps when you hook up a switch to the MAP inputs. You can use USB CONNECTION any open/close type switch. The polarity of the wires is not important. When using the Autotune kit one position will hold a base map and the other position will let you activate the learning mode. When the switch is “CLOSED” Autotune will be activated. (Set to Input 1 by default) Shifter- These inputs are for use with the Dynojet quickshifter. Insert the wires from the Dynojet CRANK quickshifter into the SHIFTER inputs. The ANALOG polarity of the wires is not important. (Set to Input 2 by default) SPEED EXPANSION PORTS 1 & 2 INPUT 2 Speed-...
  • Page 3 FIG.A Remove the radiator side panels and remove the fuel tank. Secure the PCV to the left side of the frame spar using the supplied Velcro (Fig. A). Make sure to clean both surfaces with the alcohol swab before attaching. Route the PCV harness to the inside of the frame. FIG.B Locate the GREY 6 pin connector near the left hand side radiator (Fig. B). Unplug this connector. Crank conn Ground wire FIG.C Plug the 6 pin connector from the PCV in-line of the stock wiring harness and crank connector (Fig. C). I17-045 www.powercommander.com 2013 Kawasaki KX250F PCV - 3...
  • Page 4 FIG.D Unplug Unplug the stock wiring harness from the primary injector (Fig. D). FIG.E Plug the PCV connectors with ORANGE colored wires in-line of the stock PCV connector wiring harness and primary fuel injector (Fig. E). PCV connector FIG.F Unplug the stock wiring harness from the Throttle Position Sensor (Fig. F). Unplug This connector is located on the left side of the throttle body . I17-045 www.powercommander.com 2013 Kawasaki KX250F PCV - 4...
  • Page 5 FIG.G FIG. PCV connector 10 Plug the PCV connectors in-line of the stock wiring harness and throttle body PCV connector (Fig. G). FIG.H 11 Locate the secondary fuel injector in the intake duct, behind the rubber flap, on the left side of the bike, to the rear of the frame rail (Fig. H). Unplug FIG.I 12 Plug the PCV connectors with the YELLOW colored wires in-line of the stock wiring harness and the secondary fuel injector (Fig. I). PCV connector PCV connector I17-045 www.powercommander.com 2013 Kawasaki KX250F PCV - 5...
  • Page 6 FIG.J FIG. 13 Attach the ground wire of the PCV to the stock ground location (Fig. J). This is located near the crank connector you plugged into in step 6. 14 Reinstall the fuel tank making sure it does not interfere with the PCV harness. PCV ground 15 Reinstall side panels and seat. I17-045 www.powercommander.com 2013 Kawasaki KX250F PCV - 6...