Developer Material - Toshiba e-STUDIO2330C Service Manual
Hide thumbs
Also See for e-STUDIO2330C:
- Service handbook (512 pages) ,
- Management manual (226 pages) ,
- Copying manual (174 pages)
Table of Contents
13.5.3
Developer material
(1)
Take off the Developer unit.
P.12-15 "12.6.3 Cleaning unit/ Developer
unit"
(2)
Lift up the latch on the front side of the upper
cover as shown in the figure A, and release it
by pulling the toner supply section in the
direction shown in the figure B.
(3)
Insert the flat head screwdriver between the
latch and the frame on the front side of the
upper cover, and pull the toner supply
section toward the front while turning the
screwdriver in the direction of the arrow
shown in the figure C to release the latch
shown in the figure D.
(4)
Insert the flat head screwdriver between the
latch and the frame on the rear side of the
upper cover as shown in the figure E, and
release it by pulling down the screwdriver in
the direction of the arrow in the figure to
make a gap between the latch and the frame.
The latch shown in the figure F is also
released accordingly.
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
Toner supply section
B
Fig. 13-12
D
Latch
C
Latch
Fig. 13-13
Fig. 13-14
e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
13 - 13
Latch
A
Toner supply section
Latch
F
E
Latch
DEVELOPER UNIT
13
Hide quick links:
Chapters
Table of Contents
Troubleshooting
