Main Charger Cleaner - Toshiba e-STUDIO2330C Service Manual
Hide thumbs
Also See for e-STUDIO2330C:
- Service handbook (512 pages) ,
- Management manual (226 pages) ,
- Copying manual (174 pages)
Table of Contents
12.6.5
Main charger cleaner
(1)
Take off the main charger assembly.
P.12-15 "12.6.4 Main charger assembly"
(2)
Remove the main charger cleaner rod from
the guide.
(3)
Turn the main charger cleaner rod for 90
degrees to take it off.
Note:
Be sure to insert the main charger cleaner
rod all the way in before turning it 90
degrees, otherwise the needle electrodes
may be damaged.
(4)
Peel 2 main charger cleaner off the main
charger cleaner rod.
Note:
Attach the main charger cleaner with its
sides contacting the rib of the main charger
cleaner rod as indicated by arrows shown in
the figure.
e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
PROCESS UNIT RELATED SECTION
Guide
Needle electrode
Main charger cleaner
Main charger cleaner
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
12 - 16
Main charger
cleaner rod
Main charger
cleaner rod
Fig. 12-20
Main charger
cleaner rod
Fig. 12-21
Rib
Fig. 12-22
Hide quick links:
Chapters
Table of Contents
Troubleshooting
