Quad Gigabit Ethernet Line Card (Qglc) - Cisco ASR 5000 Installation Manual
Hide thumbs
Also See for ASR 5000:
- Administration manual (466 pages) ,
- Installation manual (37 pages) ,
- Installation procedure (8 pages)
Table of Contents
ASR 5000 Hardware Platform Overview
The following diagram shows the front panel of the GLC2 with an optical connector, identifying its interfaces
and major components.
Figure 15: Gigabit Ethernet Line Card (GLC2)
Table 13: GLC2 Callouts
Item
1
2
3
4
Quad Gigabit Ethernet Line Card (QGLC)
The QGLC is a 4-port Gigabit Ethernet line card that installs directly behind its associated packet processing
card to provide network connectivity to the packet data network. There are several different versions of Small
Form-factor Pluggable (SFP) modules available for the QGLC.
Description
Card Ejector Levers—Use to insert/remove card to/from chassis.
Interlock Switch—In its Down position, the interlock switch notifies system to safely power down
card prior to removal.
Card Level Status LEDs—Show the status of the card. See Applying Power and Verifying
Installation for definitions.
Gigabit Ethernet Interface—Gigabit Ethernet (GE) SFP modules.
1000Base-SX, 1000Base-LX, and 1000Base-T interfaces are supported depending on the SFP
module installed.
Quad Gigabit Ethernet Line Card (QGLC)
ASR 5000 Installation Guide
27
Table of Contents
