Asr 5000 Installation Guide - Cisco ASR 5000 Installation Manual
Hide thumbs
Also See for ASR 5000:
- Administration manual (466 pages) ,
- Installation manual (37 pages) ,
- Installation procedure (8 pages)
Table of Contents
Gigabit Ethernet Line Card (GLC2)
Table 12: SFP Modules Supported by the GLC2
Module Type
1000Base-SX
1000Base-LX
1000Base-T
This product has been tested and found to comply with the limits for Class 1 laser devices for IEC825,
Important
EN60825, and 21CFR1040 specifications.
The GLC2 supports the Star Channel (1 Gbps) for faster FPGA upgrades and is Restriction of Hazardous
Substances (RoHS) 6/6 compliant.
The GLC2s can be installed in chassis slots 17 through 23, 26 through 39, and 42 through 48. These cards
are always installed directly behind their respective or packet processing cards, but they are not required
behind any redundant packet processing cards (those operating in Standby mode).
ASR 5000 Installation Guide
26
Card
Interface
Identification
Type
Ethernet
Fiber, LC
1000 SX
duplex
female
connector
Ethernet
Fiber, LC
1000 LX
duplex
female
connector
Ethernet
RJ-45
1000 Copper
ASR 5000 Hardware Platform Overview
Cable Specifications
Fiber Type: Multi-mode fiber (MMF), 850 nm wavelength
Core Size (microns)/Range:
• 62.5/902 feet (275 meters)
• 50/1640 feet (500 meters)
Minimum Tx Power: -9.5 dBm
Rx Sensitivity: -17 dBm
Fiber Type: Single-mode fiber (SMF), 1310 nm wavelength
Core Size (microns)/Range: 9/32808 feet (10 kilometers)
Minimum Tx Power: -9.5 dBm
Rx Sensitivity: -19 dBm
Operates in full-duplex up to 100 meters of CAT-5 Shielded
Twisted Pair (STP) cable with BER less than 10e-10.
Table of Contents
