Gigabit Ethernet Line Card (Glc2) - Cisco ASR 5000 Installation Manual
Hide thumbs
Also See for ASR 5000:
- Administration manual (466 pages) ,
- Installation manual (37 pages) ,
- Installation procedure (8 pages)
Table of Contents
Gigabit Ethernet Line Card (GLC2)
Gigabit Ethernet Line Card (GLC2)
The following figure shows the single-port GLC2. The front panel of this card is labeled "Ethernet 1000".
This card supports a single fiber or copper Small Form-factor Plugin (SFP) transceiver module as described
below:
Figure 43: GLC2 Fiber Optic Interface
Important
Table 40: SFP Modules Supported by the GLC2
Module
Type
1000Base-SX
ASR 5000 Installation Guide
108
The following SFP modules are hot-pluggable.
Card
Interface
Identification
Type
Ethernet
Fiber, LC
1000 SX
duplex
female
connector
Cable Specifications
Fiber Type: Multi-mode fiber (MMF), 850 nm wavelength
Core Size (microns)/Range:
• 62.5/902.23 feet (275 meters)
• 50/1640.42 feet (500 meters)
Minimum Tx Power: -9.5 dBm
Rx Sensitivity: -17 dBm
Cabling the Gigabit Ethernet Line Cards
Table of Contents
