Asr 5000 Installation Guide - Cisco ASR 5000 Installation Manual
Hide thumbs
Also See for ASR 5000:
- Administration manual (466 pages) ,
- Installation manual (37 pages) ,
- Installation procedure (8 pages)
Table of Contents
Replacing a Power Filter Unit
Step 2
Slide the PFU assembly into the PFU bay until it is flush against the chassis.
Step 3
Use a Phillips #2 screwdriver to tighten each of the four screws on the PFU to secure it to the chassis.
Step 4
Use a Phillips #2 screwdriver to remove the plastic cover from the power terminals.
Each of the four power terminals is shipped with one nut and two washers. The 165A PFU has one lock-washer and one
flat washer.
To avoid electric shock, ensure that the power source is off before attaching power cables to the PFU(s) installed in the
chassis.
Spannungsversorgung abschalten vor Anschluss der Kabel an die Netzteile, um einen elektrischen Schlag zu vermeiden.
Installing the Replacement PFU
ASR 5000 Installation Guide
201
Table of Contents
