Asr 5000 Installation Guide - Cisco ASR 5000 Installation Manual
Hide thumbs
Also See for ASR 5000:
- Administration manual (466 pages) ,
- Installation manual (37 pages) ,
- Installation procedure (8 pages)
Table of Contents
Quad Gigabit Ethernet Line Card (QGLC)
If you enter the show card table CLI command, the QGLC is listed as a Quad 1000 Ethernet Line Card.
Important
Figure 44: QGLC Fiber Optic Interfaces
The QGLC supports four fiber or copper SFP transceiver modules as described below. The modules are
Important
hot-pluggable. However, they must all be the same type. You cannot mix-and-match SFP modules in one
QGLC.
Table 41: SFP Modules Supported by the QGLC
Module
Type
1000Base-SX
ASR 5000 Installation Guide
110
Card
Interface
Identification
Type
Ethernet
Fiber, LC
1000 SX
duplex
female
connector
Cable Specifications
Fiber Type: Multi-mode fiber (MMF), 850 nm wavelength
Core Size (microns)/Range:
• 62.5/902.23 feet (275 meters)
• 50/1640.42 feet (500 meters)
Minimum Tx Power: -9.5 dBm
Rx Sensitivity: -17 dBm
Cabling the Gigabit Ethernet Line Cards
Table of Contents
