Rcc Run/Fail Led States - Cisco ASR 5000 Installation Manual
Hide thumbs
Also See for ASR 5000:
- Administration manual (466 pages) ,
- Installation manual (37 pages) ,
- Installation procedure (8 pages)
Table of Contents
Applying Power and Verifying the Installation
The possible states for all of the SPIO's LEDs are described in the sections that follow.
Figure 59: RCC LEDs
RCC Run/Fail LED States
The RCC Run/Fail LED indicates the overall status of the card. This LED is illuminated steady green during
normal operation.
If the LED is not green, use the troubleshooting information in the table to diagnose the problem.
Table 77: RCC Run/Fail LED States
Color
Green
Red
Description
Troubleshooting
Card powered with no
None needed.
errors detected
Card powered with
Errors were detected during the POSTs. It is likely that the errors
error(s) detected
were logged to the system's command line interface during the
boot process.
Checking the LEDs on the RCC(s)
ASR 5000 Installation Guide
165
Table of Contents
