Electric Connections - Bosch Rexroth Hägglunds DOb Installation And Maintenance Manual

Drive unit
Table of Contents
30/80
Installation
Bosch Rexroth AB, Installation and maintenance manual, Hägglunds DOb, RE 15327-WA/05.2017

7.6 Electric connections

7.6.1 Safety precautions
Installation of electrical equipment must in most countries be installed by licensed
electricians (ref. to domestic laws).
• All electric equipment has to be installed and used by qualified personnel who are
familiar with relevant safety requirements.
• Safety equipment necessary for the prevention of accidents at the mounting and
operating site shall be provided in accordance with the regulations prevailing in the
local country.
• Grounding shall be carried out according to local regulations before the electric
equipment is connected to the main voltage. Grounding point on the side of the
frame.
• All electrical supply levels must be within the limits that the equipment is
constructed for, see order specific Hägglunds DOb documentation and rating plate.
Fig. 15: Grounding point
7.6.2 Electrical connection
Connect the cables to the terminals inside the control cabinet
Grounding point
DD00083859
Table of Contents
loading

Table of Contents