Positioning The Drive Unit - Bosch Rexroth Hägglunds DOb Installation And Maintenance Manual

Drive unit
Table of Contents
24/80
Installation
Bosch Rexroth AB, Installation and maintenance manual, Hägglunds DOb, RE 15327-WA/05.2017
lifting with ropes/chains
Fig. 8: lifting the Dob
Danger while transporting or lifting Hägglunds drive unit due to heavy weight!
Danger to life, risk of injury or serious injuries and risk of damage to equipment
Do not stand under hanging load.
Use only lifting equipment adapted to the weight of the drive unit (check rating
plate inside the cabinet).
Centre of gravity is high, see label on plastic cover of cabinet.
Do not lift the drive unit with hydraulic fluid in the tank,
Always use all three lifting points when lifting the drive unit.

7.3 Positioning the drive unit

The following minimum space must be left around the drive unit, to ensure free
ventilation and provide sufficient working space for easier maintenance. Heavier
maintenance e.g. change of motor/pump will demand more working space.
It is important that all pipes are mounted to give sufficient working space for
maintenance.
Unstable movement or turning over of the drive unit at installation of drive units
in outdoor environment with heavy wind, at inclined surfaces or in areas with
risk for earthquakes.
Risk of injury or serious injuries
The drive unit has to be fixed to the ground with fixing screws or similar.
DANGER
wARNING
DD00086265
Table of Contents
loading

Table of Contents