Table of Contents
14/80
General instructions on material damage and product damage
Bosch Rexroth AB, Installation and maintenance manual, Hägglunds DOb, RE 15327-WA/05.2017
Contamination of the hydraulic fluid!
The cleanliness of the hydraulic fluid has a considerable impact on the cleanliness
and service life of the hydraulic system. Contamination of the hydraulic fluid could
cause premature wear and malfunctions!
▶
Make sure that the working environment at the installation site is fully free of
dust and foreign substances in order to prevent contaminants, such as welding
beads or metal cuttings, from getting into the hydraulic lines and causing
product wear or malfunctions. The Hägglunds drive unit must be installed in a
clean condition.
▶
Use only clean connections, hydraulic lines and attachments (e.g. measuring
equipment).
▶
No contaminants may enter the connections when they are plugged.
▶
Before commissioning, make sure that all hydraulic connections are tight and
that all of the connection seals and plugs are installed correctly to ensure that
they are leakproof and fluids and contaminants are prevented from penetrating
the product.
▶
Use a suitable filter system to filter hydraulic fluid during filling to minimize solid
impurities and water in the hydraulic system.
Improper cleaning!
Product can be damaged!
▶
Plug all openings with the appropriate protective equipment in order to prevent
detergents from entering the hydraulic system.
▶
Never use solvents or aggressive detergents. Use only water and, if necessary, a
mild detergent to clean the Hägglunds drive unit.
▶
Never use a high pressure washing system to clean inside the drive unit
▶
Do not point the power washer at sensitive components, e.g. shaft seal,
electrical connections and components.
▶
Use lint-free cloths for cleaning.
Environmental pollution due to incorrect disposal!
Careless disposal of the Hägglunds drive unit and its fittings, the hydraulic fluid and
the packaging material could lead to pollution of the environment!
▶
Dispose of the Hägglunds drive unit, hydraulic fluid and packaging in accordance
with the national regulations in your country.
▶
Dispose of the hydraulic fluid in accordance with the applicable safety data
sheet for the hydraulic fluid.
Escaping or spilling hydraulic fluid!
Environmental pollution and contamination of the ground water!
▶
Use an oil binding agent if hydraulic fluid is spilled.
▶
Observe the information in the safety data sheet for the hydraulic fluid and the
specifications provided by the system manufacturer.
The warranty applies only to the delivered configuration.
The entitlement to warranty cover will be rendered void if the product is incorrectly
installed, commissioned or operated, or if it is used or handled improperly.
NOTe
Table of Contents
