Troubles
When the character size
is small, the marking
characters are not
readable.
Marking is dotted.
168
Causes
The setting conditions or font are
inadequate for the character size.
• For LP-GS series:
Setting of laser frequency and scan
speed is inadequate.
• For LP-RF/LP-RV series:
Setting of pulse cycle and scan
speed is inadequate.
ME-LPGS-SM-8
Measures
• Use "Original 2" or "Original 5" font for the
small size characters.
• Adjust the laser power or scan speed.
Decrease scan speed or increase laser
frequency.
Decrease scan speed or pulse cycle.