Show Ip Igmp Snooping Mrouter - D-Link DXS-3600 Series Reference Manual
Dxs-3600 series layer 2/3 managed 10gigabit ethernet switch
Hide thumbs
Also See for DXS-3600 Series:
- Cli reference manual (1456 pages) ,
- Reference manual (680 pages) ,
- Hardware installation manual (55 pages)
Table of Contents
DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
eth3/0/1：
Rate limit: 30pps
Access group：igmp_filter
Groups/Channel Limit：25 (Exception List: igmp_filter, exceed-action: drop)
eth3/0/3：
Rate limit: 20pps
vlan1：
Access group：igmp_filter
Groups/Channel Limit：Not Configured
vlan2：
Access group：Not Configured
Groups/Channel Limit：100 (exceed-action: replace)
port-channel4：
Rate limit： Not Configured
Access group：Not Configured
Groups/Channel Limit：Not Configured
Switch#
This example shows how to display filter information of eth3/0/3.
Switch# show ipv6 igmp snooping filter interface eth3/0/3
eth3/0/3：
Rate limit: 30pps
Groups/Channel Limit：25 (Exception List: igmp_filter, exceed-action: replace)
Vlan1：
Access group：igmp_filter
Vlan2：
Access group：Not Configured
Switch#
44-23
show ip igmp snooping mrouter
This command is used to display IGMP snooping m-router information learned and configured on the
switch.
show ip igmp snooping mrouter [vlan VLAN-ID [,|-]]
Parameters
vlan VLAN-ID [,|-]
(Optional) Specifies the VLAN. If no VLAN is specified, IGMP snooping
information on all VLANs will be displayed of which IGMP snooping is
550
Table of Contents
