Distance Ospf - D-Link DXS-3600 Series Reference Manual
Dxs-3600 series layer 2/3 managed 10gigabit ethernet switch
Hide thumbs
Also See for DXS-3600 Series:
- Cli reference manual (1456 pages) ,
- Reference manual (680 pages) ,
- Hardware installation manual (55 pages)
Table of Contents
DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Switch(config)# router ospf
Switch(config-router)# default-information originate always
Switch(config-router)#
71-8 default-metric (OSPF)
This command is used to configure the default metric value for the routing protocol. Use the no command
to remove the default metric setting.
default-metric METRIC-VALUE
no default-metric
Parameters
METRIC-VALUE
Default
By default, this value is 20.
Command Mode
Router Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
The default-metric command is used in conjunction with the redistribute router configuration
command to cause the current routing protocol to use the default metric value for the redistributed routes
that have no metric specified.
Example
This example shows how to configure router redistributes RIP-derived routes into the OSPF domain and
that all redistributed routes are advertised with an OSPF metric of 10.
Switch# configure terminal
Switch(config)# router ospf
Switch(config-router)# default-metric 10
Switch(config-router)# redistribute rip
Switch(config-router)#
71-9 distance ospf
This command is used to configure the distance for specific OSPF routes. Use the no form of the
command to restore to the default setting.
distance ospf {inter-area | intra-area | external-1 | external-2} DISTANCE
no distance ospf
Specifies the default metric value for the redistributed routes. The valid
value is from 1 to 16777214.
810
Table of Contents
