Show Ipv6 Pim Mroute - D-Link DXS-3600 Series Reference Manual
Dxs-3600 series layer 2/3 managed 10gigabit ethernet switch
Hide thumbs
Also See for DXS-3600 Series:
- Cli reference manual (1456 pages) ,
- Reference manual (680 pages) ,
- Hardware installation manual (55 pages)
Table of Contents
DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
78-20
show ipv6 pim mroute
This command is used to display the PIM IPv6 multicast routing table.
show ipv6 pim mroute sparse-mode
Parameters
None.
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display all entries in the IPv6 multicast routing table. The switch populates the
multicast routing table by creating source, group (S,G) entries from star, group (*,G) entries. The star (*)
refers to all source addresses, the "S" refers to a single source address, and the "G" is the destination
multicast group address. In creating (S,G) entries, the software uses the best path to that destination
group found in the unicast routing table, through Reverse Path Forwarding (RPF).
Example
This example shows how to display the PIM-SM multicast routing table.
Switch# show ipv6 pim mroute sparse-mode
PIM-SM Multicast Routing Table:
JP State- Join Prune State, ET - Expiry Timer, PPT - Prune Pending Timer,
KAT - Keep Alive Timer
Flags: S - Sparse, T - SPT-bit set.
(*, ff13::10) Uptime: 0DT00H04M43S, Flags:S
RP: 3ffe:6000:1005::36, RPF nbr: FE80::217:55FF:FEC0:16, RPF interface: vlan101
Upstream interface:
Join State: Joined, Join Timer: 17 secs
Downstream Interface List:
vlan11:
JP State: Join, ET: 166 secs, PPT: off
Assert State: No Info, Assert Timer: off
Assert Winner: ::, Metric: 0, Pref: 0
(3ffe:6000:1005::DD, ff13::10) Uptime: 0DT00H00M05S, Flag:ST
RPF nbr: FE80::217:55FF:FEC0:16, RPF Interface: vlan101
Upstream Interface:
Join State: Joined, Join Timer: 55 secs, KAT: off
Downstream Interface List:
vlan11:
JP State: Join, ET: 205 secs, PPT: off
926
Table of Contents
