Table of Contents
MsgVal32-1
Message Valid Bits (of all Message Objects)
0
This Message Object is ignored by the Message Handler.
1
This Message Object is configured and should be considered by the Message Handler.
These registers hold the MsgVal bits of the 32 Message Objects. By reading out the MsgVal bits, the CPU
can check which Message Object is valid. The MsgVal bit of a specific Message Object can be set/reset by
the CPU via the IFx Message Interface Registers.
If more than 32 message buffers are implemented then the following table gives an overview about the
additional flags:
Table 2-4 Additional flags when more than 32 message buffers exist
MSGVAL 4 & 3
MsgVal 64-33 (address 0xB4)
MSGVAL 6 & 5
MsgVal 96-65 (address 0xB8)
MSGVAL 8 & 7
MsgVal 128-97 (address 0xBC)
addr+0
addr+1
MsgVal64-57
MsgVal56-49
MsgVal96-89
MsgVal88-81
MsgVal120-
MsgVal128-121
113
Chapter 34 CAN Controller
2.Register Description
addr+2
addr+3
MsgVal48-41
MsgVal40-33
MsgVal80-73
MsgVal72-65
MsgVal112-
MsgVal104-97
105
719
Table of Contents
