Table of Contents
Parameter
Name
Unit of
Measure
User Label
Mode
User
Terminator
Verifier
Equipped
STX KD Database Configuration
This command, stored in Flash memory for future power-ups, controls the printer's
environment and operates as a pseudo DIP switch. The Kc command is
recommended for use over KD.
Syntax
Parameters
Where w, x, y, and z are binary values with respective bit settings as defined in the
following table. (Bit 0 is least significant.)
47
Parameter
Value / Range Units / Interpretation
UM
M, I
UD
Y, N
UT
ON
VE
A, D, E, N, Y
M = Metric,
I = Imperial
Y = Enabled,
N = Disabled
N/A
See VE command details.
DPL Command Reference
Command
Equivalent
N/A
N/A
N/A
Table of Contents
