Table of Contents
Configuration
Command
Download Commands
Download
Command
Label Header Commands
These commands determine how the label formatting occurs, the print quality and
quantity. They are typically issued immediately following the L start of the label
format. The Format Attribute (A) and the Offset (C, R) commands can be changed at
any point between format records to achieve desired effects.
Label Header Command
A
C
6
Name
Function
Configuration
Determines default power-up configuration.
Set
Send Form
Sets the stop position of the printed label.
Feed
Set Maximum
Length to search for next gap or reflective mark;
Label Length
not used with continuous media.
Subsequent measurements interpreted in metric
Set to Metric
(most units, mm/10). Label equivalent command
Mode
can be used.
Subsequent measurements interpreted in inches
Set to Inch
(most units in/100). Label equivalent command
Mode
can be used.
Set Feed Rate
Sets blank label movement speed.
Enables optional hardware, cutter, and present
Software Switch
sensor.
Name
Download Image
Download Scalable
Font
Download Bitmapped
Font
Function
Downloads Image to selected memory
module.
Downloads Scalable Font to selected
memory module.
Downloads Bitmapped Font to selected
memory module.
Name
Set Format Attribute
Column Offset
DPL Command Reference
Table of Contents
