Table of Contents
Special Label Formatting Command Functions
Two Special Label Formatting Commands, the S and the T, are entered
directly into the data field of label format records. (Do not confuse them with System-
Level Commands because the same control character is used.) If alternate control
codes are enabled the becomes "~" (hexadecimal 0x7E); see
Command
Label Formatting Character
STX D Print adjusted date
This command prints the adjusted date generated by the 't' label formatting
command. Using string characters, allows the adjusted date data to be selected and
printed. In addition, the D may be preceded by data to be printed/encoded,
and/or the string may be terminated by an command followed by more data,
then terminated. The string characters are not printed; instead, the label will
show the corresponding print value.
Syntax
Parameters
Where:
string - Is any set of characters, A – Z and a - h; see the following table.
l
String Characters
A
BCD
EF
GH...O
PQ
RSTU
151
Functions.
Print Values
Week Day (Mon = 1,
Sun = 7)
Day Name
Month Number
Month Name
Day
Year
Command Description
Print adjusted date
Recall global data and place in field
Print time and date
String Markers
VW
XY
Za
gh
bc
def
Control Code
Print Values
24-hour time
format
12-hour time
format
Minutes
Seconds
AM or PM
Julian Date
DPL Command Reference
Table of Contents
