Table of Contents
Control
Character
SOH
STX
CR
ESC
"Count By" *
* See the
Note: Throughout this manual , , , , and ^ will be used to indicate
control codes. The actual values will depend on whether standard or alternate control
codes are enabled for the particular application.
Alternate Line Terminator Example: Alternate Control Codes provide for substitution
of the line terminator, as well as the control characters listed above. For example
using Alternate 2, the line terminator (0x0D) is replaced by | (0x7C). The
following is a sample label format data stream for a printer configured for Alternate-2
Control Codes:
~L|1911A10001000101234560|X|~UT01ABCDE|~G|
DPL Command Reference
Standard
0x01
0x02
0x0D
0x1B
0x5E
^ Set Count by Amount
Alternate
Alternate 2 Custom
0x5E
0x5E
0x7E
0x7E
0x0D
0x7C
0x1B
0x1B
0x40
0x40
label formatting command.
Command
Type
Control
System
User
Line
Defined
Termination
Front Loading
Label
Formatting
3
Table of Contents
