Table of Contents
Concluding steps
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
9.4.2
Removing a GPU card from riser module 1
Upgrade and Repair Unit
(URU)
Tools:
– Phillips PH1 / (+) No. 1 screw driver
– Phillips PH2 / (+) No. 2 screw driver
Preliminary steps
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶ Remove the GPU air duct, see
▶ Remove the riser module 1, see
Removing the GPU card from riser module 1
The GPU card can only be installed in slot 3 for riser module 1.
▶ Disconnect the power cable from the GPU card and the system board.
RX2450 M1
44.
48.
49.
37.
"Removing the air ducts" on page
"Removing the riser module 1" on page
Upgrade and Maintenance Manual
Expansion cards and riser cards
Hardware: 10 minutes
38.
39.
62.
51.
129
Table of Contents
