Table of Contents
Expansion cards and backup units
▶ If applicable, update the system information of your server using the Chassis
ID Prom Tool, see
▶
"Updating expansion card firmware" on page
▶
"Resuming BitLocker functionality" on page
9.7.2
Removing a GPU card from a riser module
Upgrade and Repair Unit
(URU)
Tools:
Phillips PH2 / (+) No. 2 screw driver
Preliminary steps
▶
"Suspending BitLocker functionality" on page
▶ If applicable,
"Removing the front cover with lock" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶ Remove all riser modules, see
▶
"Removing an expansion card from a riser module" on page
▶ If necessary, remove the cables from the expansion cards.
▶
"Removing the air duct" on page
▶ Disconnect the GPU power cable from the system board connector.
Removing the GPU card from a riser module (example GPU NVIDIA A16)
The GPU cards A30/A40/A100/H100/RTX A4500/RTX A6000/A30X/
A100X have the same removal procedure.
290
"Using the Chassis ID Prom Tool" on page
"Removing a riser module" on page
80.
Upgrade and Maintenance Manual
98.
107.
Hardware: 5 minutes
Software: 5 minutes
89.
50.
50.
55.
113.
49.
72.
313.
RX2540 M7
Chapters
Table of Contents
