9.3.5
Removing an expansion card from riser module 2
Upgrade and Repair Unit
(URU)
Tools:
Phillips PH2 / (+) No. 2 screw driver
Preliminary steps
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶ Remove the riser module 2, see
Removing the expansion card from riser module 2
▶ If necessary, disconnect the cables from the expansion card.
▶ Remove the screw from the slot bracket of the desired expansion card.
▶ Pull out the expansion card from the PCIe slot.
Figure 78: Installing the slot cover - example slot 1
RX2450 M1
37.
"Removing the riser module 2" on page
Upgrade and Maintenance Manual
Expansion cards and riser cards
Hardware: 10 minutes
38.
39.
52.
115