Table of Contents
IEC 62591 Wireless Interface Instruction Manual (for ROC800-Series and FloBoss 107)
3.2.5 Displaying Commissioned Transmitters
Revised June-2018
Figure 3-10. Diagnostics screen
The screen provides basic information to create and process the
diagnostic log. However, Technical Support personnel can use the
Logging Severity frame to more thoroughly identify problems you're
your system.
Field
Logging Severity
Set Logging Level
From the main IEC 62591 module screen, you can display and quickly
access transmitter-specific information. Select the Transmitter tab to
display the Transmitter screen.
Configuration and Commissioning
Description
Sets the amount of accumulated system activity
data included in the diagnostic log. 1 is the most
comprehensive (most logs) and 9 is the least
comprehensive (fewest logs) setting. The default
setting is 4.
Note: Use this field only under the direction of
Technical Support personnel.
Click to set the severity of logs. The system
validates your selection by displaying the message
Set Logging Severity X COMPLETED, where X
represents the severity you have selected.
3-21
Table of Contents
Troubleshooting
