Mounting And Connecting; Setup - Emerson Smart Wireless Gateway Reference Manual

Smart wireless gateway

Hide thumbs Also See for Smart Wireless Gateway:

Table of Contents

Appendix C: DeltaV ready

April 2013

C.4

Mounting and connecting

Mount the DeltaV Ready Gateway in the same manner as a standard Gateway. (Section 3:

Mounting and Connection on page 3-1). The Gateway should be mounted in a location that

allows convenient access to the DeltaV control network as well as the wireless field network.

Connect the Gateway's primary Ethernet port (Ethernet 1) into the DeltaV primary control

network. If the dual Ethernet option (Physical Connection code 2) was ordered with the

Gateway, connect the secondary Ethernet port (Ethernet 2) into the DeltaV secondary control

network.

Figure C-1. Delta V Control Network Architecture

C.5

Out of the box the Smart Wireless Gateway is pre-configured for use on the DeltaV control

network. In the DeltaV Explore application, the Gateway will automatically appear in the

Decommissioned Nodes folder.

To setup a wireless network will require 3 steps:

Pri

Con

Commission the Gateway.

Assign wireless device tags.

Assign Gateway to controller and download.

Pro

Sec

Reference Manual

00809-0200-4420, Rev GA