Summary of Contents for Emerson PRIMA SNUGGER CF905BS00
Page 1
READ AND SAVE THESE INSTRUCTIONS PRIMA SNUGGER Ceiling Fan Owner's Manual Model Numbers CF905BS00 CF905ORB00 CF905CK00 CF905VNB00 CF905GES00 18.3 Net Weight: Lbs. Part No. F40BP74320000 Form No. BP7432 U.L. Model No.: CF905...
WARNING: To reduce the risk of fire or electric shock, this fan should only be used with fan speed control, Model No. SW46/U.L. Model No. UC9020 manufactured by Rhine Electric Co., Ltd. WARNING: To avoid fire, shock or injury, do not use an Emerson or any other brand of control not specifically approved for this fan.
Page 3
EMERSON QUICK START GUIDE The Quick Start Guide covers the installation WARNING instructions common for ceiling fan operations. If additional assistance with wiring, alternate hanging To reduce the risk of fire, electric shock, or systems, or lighting options, proceed to the complete personal injury, mount fan to outlet box marked instructions of this Owner’s Manual.
Page 4
EMERSON QUICK START GUIDE How to Put Your Ceiling Fan Together (pages 9 & 10) 1. Remove the 10-24 x 3/8” pan head screw with lockwasher KEY HOLE SLOT nearest the hook from the ceiling mounting plate and retain for later use.
Page 5
EMERSON QUICK START GUIDE How to Put Your Ceiling Fan Together (pages 10 & 11) 11. Attach one blade assembly to the motor using the two 1/4-20 x 9/16” captive flange screws with lockwashers. Make sure the screws are tightened securely. Repeat this procedure for the...
Emerson Electric Co. Substitution of parts or accessories not designated for use with this product by Emerson Electric Co. could result in personal injury or property damage. 1. Open carton containing fan. Remove top half of styrofoam unit.
Emerson Your Emerson ceiling fan comes supplied with a Fan Electric Fan/Light Remote Control supplied with the Remote Control which consists of a wall mounted fan.
Securely connect wires with wire connector HOLE (supplied). NOTE: If you are using an Emerson Light Fixture with your fan, see the Light Fixture Owner’s Manual for wiring. 3. Connect the fan motor assembly white wire to the...
Page 9
How to Put Your Ceiling Fan Together 1. Remove the 10-24 x 3/8” pan head screw with KEY HOLE SLOT lockwasher nearest the hook from the ceiling mounting plate and retain for later use. Loosen the remaining two 10-24 x 3/8” pan head screws several turns.
Page 10
"HOT" supply wire that is not attached to the supplied wall control. See your Emerson dealer for optional remote control options that can control the fan and accessory light kit using a single SWITCH HOUSING "HOT"...
How to Put Your Ceiling Fan Together (continued) 14. Position the switch housing assembly on the SWITCH switch housing plate and align the holes in the HOUSING ASSEMBLY switch housing assembly with the holes in the plate. Secure the switch housing assembly by reinstalling the four screws removed previously (Figure 13).
Wall Control Installation This control is designed to operate only one ceiling fan, and not an accessory light kit. This wall control is rated for 1.2 amps at 120 volts. NOTE: The “0” position is OFF. The four fan speeds are selected by sliding the bar to the other four speed positions (“1”, “2”, “3”...
Emerson Electric Co. Substitution of parts or WARNING accessories not designated for use with this product by Emerson Electric Co. could result in personal injury or property damage. The use of any other control not specifically approved for this fan could result in fire, shock and personal injury.
Trouble Shooting WARNING: For your own safety, turn off power at fuse box or circuit breaker before trouble shooting your fan. TROUBLE PROBABLE CAUSE SUGGESTED REMEDY 1. Fuse or circuit breaker blown. 1. Check main and branch circuit fuses or circuit 1.
You will be responsible for all insurance, freight or other transportation charges to our factory or authorized service center. Your Emerson Air Comfort Ceiling Fan should be properly packed to avoid damage in transit since we will not be responsible for any such damage.