Table of Contents
Quick Links
READ AND SAVE THESE INSTRUCTIONS
LACLEDE Eco LED
62" Ceiling Fan Owner's Manual
CF995BS01 -
CF995VNB01 -
Questions, problems, missing parts: Before returning to the store call
Part No. F40BP74790001
Revision: 190204
Model Numbers
Brushed Steel
34.6
Net Weight:
Emerson Electric Customer Service
8 a.m. - 6 p.m., Eastern, Monday-Friday
1-800-654-3545
www.emersonfans.com
Venetian Bronze
Lbs.
Form No. BP7479-1
ETL Model No.: CF995-1
Table of Contents
Troubleshooting
Related Manuals for Emerson Laclede Eco LED CF995BS01
Summary of Contents for Emerson Laclede Eco LED CF995BS01
- Page 1 Brushed Steel CF995VNB01 - Venetian Bronze 34.6 Net Weight: Lbs. Questions, problems, missing parts: Before returning to the store call Emerson Electric Customer Service 8 a.m. - 6 p.m., Eastern, Monday-Friday 1-800-654-3545 www.emersonfans.com Part No. F40BP74790001 Form No. BP7479-1 Revision: 190204...
-
Page 2: Table Of Contents
RH786NRG, manufactured by Rhine Electric Co., Ltd. without blades. To avoid fire, shock or injury, do not use an Emerson or 2. All wiring must be in accordance with the National any other brand of control not specifically approved for Electrical Code “ANSI/NFPA 70-2017”... -
Page 3: Unpacking Instructions
Emerson Electric Co. Substitution of parts or accessories not designated Blade Flanges for use with this product by Emerson Electric Co. could Fan Blades result in personal injury or property damage. Upper Glass Shade... -
Page 4: Electrical Requirements
WARNING Please call Emerson Technical Support Turning off wall switch is not sufficient. To avoid possible 1-800-654-3545 if you have any questions about electrical shock, be sure electricity is turned off at the installation and operation of this Ceiling Fan. -
Page 5: Ceiling Fan Assembly
3. Ceiling Fan Assembly Mount Blade Flanges to Fan Blades and securely tighten the Four #10 - 32 x 1/4” Washer Head Blade Screws #10 - 32 x 1/4" WASHER HEAD (supplied with fan) (Figure 1). SCREWS (4 per blade) Repeat this procedure for the other Four Blades and Flanges. - Page 6 3. Ceiling Fan Assembly (continued) Engage the Black Connector of the Lower Light Fixture with the Black Motor Connector. LOWER LIGHT FIXTURE Engage the White Connector of the Lower Light Fixture LOWER LIGHT FIXTURE with the White Motor Connector. WHITE CONNECTOR MOTOR WHITE CONNECTOR Make sure each Connector latches properly (Figure 4).
- Page 7 3. Ceiling Fan Assembly (continued) Remove One #8 - 32 x 5/16” Pan Head Screw from the Lower Light Fixture (retain for later use). Loosen the other Three Screws to assemble the Lower Light Cover to the Fixture (Figure 7). Figure 7 Position the Light Cover above the Fixture and carefully tuck the Wires and Connectors into the space provided...
- Page 8 3. Ceiling Fan Assembly (continued) 3.11 Separate, untwist and unkink the Two 80” Motor Wires. TWO 80" MOTOR WIRES (UNTWISTED) Route the Two 80” Black and White Motor Wires through the 10” Downrod (Figure 11). 10" DOWNROD Figure 11 3.12 Loosen the Two Phillips Head Set Screws in the Motor Coupler for installation of the 10”...
- Page 9 3. Ceiling Fan Assembly (continued) 3.13 Install the Clevis Pin and secure with the Hairpin Clip (Figure 13). HAIRPIN CLIP CLEVIS The Clevis Pin must go through the Holes in the Motor Coupler and Downrod. It is critical that the Clevis Pin in the CLEVIS PIN Motor Coupler is properly installed and securely tightened.
- Page 10 3. Ceiling Fan Assembly (continued) 3.16 Place the Ceiling Cover over the 10” Downrod. 10" DOWNROD Be sure the Ceiling Cover is oriented correctly (Figure 16). CEILING COVER Figure 16 3.17 Route the Two Motor Wires through the Hanger Ball. Reinstall the Hanger Ball (Figure 17) on the Downrod as follows: HANGER BALL...
- Page 11 3. Ceiling Fan Assembly (continued) 3.18 The Fan comes with Black and White Wires that are 80-inches long. BLACK WIRE Before installing the Fan, measure up approximately 6 to 9-inches above top of Hanger Ball/Downrod Assembly (Figure 18). 6 TO 9 WHITE WIRE INCHES Cut off excess Wires and strip back insulation 1/2-inch...
-
Page 12: How To Hang Your Ceiling Fan
4. How to Hang Your Ceiling Fan WARNING CEILING The fan must be hung with at least 7' of clearance from floor to blades (Figure 21). WARNING The outlet box and joist must be securely mounted and AT LEAST capable of supporting at least 50 lbs. Use only a U.L. outlet box listed as “Acceptable for Fan Support of 22.7 kg. -
Page 13: How To Wire Your Ceiling Fan
Emerson Electric Co. Substitution of parts or accessories not designated for use with this product by Emerson Electric Co. could result in personal injury or property damage. Securely connect the Fan Motor White Wire to the Supply White (neutral) Wire using a Wire Connector, supplied (Figure 25). - Page 14 5. How to Wire Your Ceiling Fan (continued) Securely connect the Fan Motor Black Wire to the Supply Black (hot) Wire using Wire Connector (supplied) (Figure 26). SUPPLY BLACK (HOT) LISTED WIRE CONNECTOR FAN MOTOR BLACK WIRE Figure 26 After Connections have been made, turn Wires upward and carefully push Wires into the Outlet Box, with the White and Green Wires on one side of the Outlet Box and position the Black Wires on the other side of the Outlet...
-
Page 15: Final Assembly
6. Final Assembly Lift the Ceiling Cover up to the Threaded Studs and turn until Studs protrude through the holes in the Ceiling Cover (Figure 29). Secure the Ceiling Cover in place by sliding Lockwashers over the Threaded Studs and installing the two Knurled Knobs (supplied). - Page 16 6. Final Assembly (continued) Upper Light Bulb Installation: Install the Four 6.5W A15 Medium Base LED Bulbs 6.5-WATT A15 (supplied) into the Upper Light Fixture Sockets (Figure 30). MEDIUM BASE LED LIGHT BULBS (4) UPPER LIGHT SOCKETS (4) Figure 30 Lower Light Bulb Installation: Install the Five 6.5W A15 Medium Base LED Bulbs 6.5-WATT A15 MEDIUM...
- Page 17 6. Final Assembly (continued) Remove One #8 - 32 x 5/16” Pan Head Screw from the LOWER LIGHT Lower Light Fixture Assembly (retain for later use). FIXTURE ASSEMBLY Loosen the other Two Screws to assemble the Lower Glass Shade to the Lower Light Cover (Figure 32). LOOSEN TWO #8 - 32 x 5/16"...
-
Page 18: Remote Control Procedures
7. Remote Control Procedures When the Switch is turned back ON the Light and Fan will resume operation as they we re prior to the Switch being turned OFF. 7.2: Installation of Batteries The Remote Control Transmitter is powered by two AAA Alkaline Batteries (not included). - Page 19 7. Remote Control Procedures (continued) 7.4: Operation of Remote Control IMPORTANT POWER Fan installation must be completed, including the INDICATOR LIGHT installation of the fan blades, before testing of the remote control. Your Remote Control has full control of your Fan and Light FAN BUTTON ON/OFF (Figure 36).
- Page 20 7. Remote Control Procedures (continued) To turn the Light ON and OFF, press and release the LIGHT ( ) Button. To set the Light Intensity, press and hold the LIGHT ( ) Button (Figure 38). The Light will turn ON at the previously selected intensity. If Airflow is desired in the opposite direction, press the ) Button on the Wall Control.
-
Page 21: Programming The Receiver Operating Frequency
Bracket and tighten to secure to Wall (Figure 40). SCREW Slide the Wall Bracket Cover back down over the screws. HOLES (2) Please call Emerson technical support at 1-800-654-3545 if you have any questions about installation and operation of this ceiling fan. TO INSTALL BRACKET... -
Page 22: Maintenance
• Downrod Extension Kits specifically for use with this product by Emerson Electric Co. Substitution of parts or accessories not designated for use with this product by Emerson Electric Co. could WARNING result in personal injury or property damage. The use of any other control not specifically approved for this fan could result in fire, shock and personal injury. -
Page 23: Troubleshooting
WARNING FOR YOUR OWN SAFETY TURN OFF POWER AT FUSE BOX OR CIRCUIT BREAKER BEFORE TROUBLESHOOTING YOUR FAN. TROUBLE PROBABLE CAUSE SUGGESTED REMEDY 1. Fan will not start. 1. Fuse or Circuit Breaker blown. 1. Check Main and Branch Circuit Fuses or Circuit Breakers. WARNING Make sure main power is turned OFF. -
Page 24: Repair Parts
13. Repair Parts PARTS BAG ETL Model No.: CF995-1... - Page 25 13. Repair Parts Listing Part Numbers Model Number Model Number Description CF995BS01 CF995VNB01 Hanger Ball Assembly, 761655-97 761655-96 Consisting of: Hanger Bracket — — Hanger Ball — — Downrod (10”) — — Parts Bag Containing: 764458-CHRM 764458-BLOX Pin, Clevis (1) —...
-
Page 26: Energy Efficient Use Of Ceiling Fan
Remember feet above the floor for optimal airflow. Consult your to adjust your thermostat when using your ceiling fan - Emerson Retailer for optional mounting accessories. additional energy and dollar savings could be realized with this simple step! Turn Off When Not in the Room. -
Page 27: Ceiling Fan Limited Warranty
What We Will Do To Correct Problems: If the defect is covered by this limited warranty, Emerson will repair or replace the applicable Emerson Ceiling Fan Product at no charge to You. If repair of the Emerson Ceiling Fan Product is not practical or possible within a reasonable time and no replacement Emerson Ceiling Fan Product can be provided, Emerson will refund You the actual purchase price of Your Emerson Ceiling Fan Product. - Page 28 Air Comfort Products DIVISION OF EmErSON ElEctrIc cO. 8100 W. Florissant • St. louis, mO 63136 Questions, problems, missing parts: Before returning to the store call Emerson Electric Customer Service 8 a.m. - 6 p.m., Eastern, Monday-Friday 1-800-654-3545 www.emersonfans.com Retain this manual for future use.