Leds On The Controller Unit - Bosch DSX-N1D8X4-12AT Installaton Manual
Hide thumbs
Also See for DSX-N1D8X4-12AT:
- Quick installation manual (28 pages) ,
- Quick installation manual (30 pages)
Table of Contents
14
en | System overview
Locate
3.2.2
LEDs on the controller unit
The back of the controller unit includes LEDs that indicate the status of the controller. For
example, the controller is active, the controller needs attention, or when there is Ethernet
activity.
11
13
The following table describes the LEDs and their operational states:
Cache active
Locate
2021.05 | V3 | DOC
LED
1
3
5
2
4
11
13
12
14
1
Channel 3 - host port link status LED
3
Channel 4 - host port link status LED
5
Management port 1 - Ethernet status
LED
7
Management port 2 - Ethernet status
LED
9
SAS drive expansion port - attention
LED
Cache active LED
Attention LED
LED
Status indicator
Blue
7
6
8
15
2
4
6
8
10
12
14
Status indicator
Green
Off
Blue
Off
Installaton manual
DSA E-Series (E2800 12-bay)
Description
There is an active request to physically
locate the shelf.
Note: The Locate LED turns off
automatically after 30 minutes.
17
18
16
Channel 3 - host port attention LED
Channel 4 - host port attention LED
Management port 1 - Ethernet activity
LED
Management port 2 - Ethernet activity
LED
SAS drive expansion port - link status
LED
Locate LED
Activity LED
Description
The cache contains data not yet written
to disk.
Either the cache is inactive or all data
from the cache has been preserved in
non-volatile memory.
There is an active request to physically
locate the controller unit.
There is no active request to locate the
controller unit.
Bosch Security Systems B.V.
9
10
Table of Contents
