Panasonic Eco Solutions Nordic AB
MEW01472
Rev: -
20
20.1
20.1.1
20.1.2
Planning Instructions Fire alarm system EBL512 G3, United version 2.7.x
Control unit properties (settings)
Figure 29. Win512 (version 2.7.x) "Control unit" dialog box.
NOTE! Default settings in Win512 version 2.7.x are shown but
might vary depending on convention.
Control unit properties
General data
Logical name: Normally not changed (but can be changed when
necessary).
Control unit number: A stand-alone control unit has no. 00. In a
system the control units are numbered 00 to 29.
Type of control unit
EBL512 type 1548 / 1549 / 1550: (Default) Used for an EBL512
version 2.7.x control unit.
EBL512 G3 type 5000: Used for an EBL512 G3 United version
2.7.x control unit type 5000.
EBL512 G3 type 5001: Used for an EBL512 G3 United version
2.7.x control unit type 5001 (i.e. without a front).
129