Table of Contents
Safety instructions | HyDrotrAC GFt >130 knm
Locally hot surfaces on the gearbox!
Danger of burns!
f Do not touch any hot surfaces on the planetary gearbox. The planetary gearbox
heats up to a max. of 90 °C during operation in the oil sump.
f Allow the planetary gearbox and its mounting parts to cool down to approx.
50 °C before touching.
f To protect yourself from burns, wear heat-resistant protective clothing and heat-
resistant safety gloves.
Hot lubricating oil during operation!
Danger of scalding during oil change, oil sampling and draining oil!
f To protect yourself from scaldings, wear heat- and oil-resistant safety gloves and
heat-resistant protective clothing. Wear protective goggles.
f Avoid oil temperatures of much more than 50°C when taking oil samples or
draining oil.
f When taking the oil sample or draining the lubricating oil, carefully open the oil
sampling point or oil drain.
Sharp edges and tensioned tension belts and cable fasteners as well as
rebounding parts!
Risk of injury!
f Carefully remove any attached tension belts and chains.
f When cutting tension belts and detaching chains, always wear protective
goggles and cut-resistant safety gloves.
Danger in the case of mix-up with metrical and inch threads!
Risk of injury and damaging to the gearbox!
f Only assemble the planetary gearbox, if you have the dimensioned drawing
available, indicating the thread types and sizes.
Danger in the case of faulty installation of cables and lines!
Risk of injury or property damage!
f Lay cables and lines so that they cannot be damaged and no one can trip over
them.
Metal particles or metal abrasion in the lubricating oil or in screw plugs!
Risk of injury!
f When refilling the oil during the oil change and when draining oil, always wear
oil-resistant safety gloves and protective goggles.
Setting down the planetary gearbox on unsuitable, non-load-bearing base!
Risk of injury or property damage by tipping over the planetary gearbox!
f Always load the planetary gearbox on a load-bearing surface.
f Secure the planetary gearbox against tipping over by the use of chocks, wooden
bars or the load boards provided by Rexroth.
CorreCtion Copy 1 |17.10.2019 | onLy For internAL USe
CAUtion
RE 79094, Issue 10.2019, Bosch Rexroth AG
11/64
Hide quick links:
Table of Contents
