Table of Contents
Safety instructions | HyDrotrAC GFt >130 knm
2.4
QUALiFiCAtion oF perSonneL
The operations described in this documentation require basic knowledge of
mechanics, electrics, hydraulics as well as knowledge of the related technical terms.
Transport and handling of the planetary gearbox require additional knowledge of
handling a crane or forklift (e.g. crane/forklift training, crane/forklift driver's license)
and the associated means of attachment.
In order to ensure the safe use, all operations should therefore only be carried out
by a respective qualified personnel or an instructed and trained person under the
direction of qualified personnel.
Qualified personnel are those who can recognize possible hazards and institute
the appropriate safety measures due to their professional training, knowledge and
experience, as well as their understanding of the relevant regulations pertaining the
work to be done. Specialists must comply with the applicable specialist regulations.
2.5
GenerAL SAFety inStrUCtionS
• Observe all binding regulations for accident prevention and environmental
protection.
• Observe all safety instructions and provisions of the country where the planetary
gearbox is going to be deployed/operated.
• Only use Rexroth products which are in perfect technical condition.
• Observe all instructions on the planetary gearbox.
• Persons, who assemble, commission, operate, disassemble, or maintain Rexroth
products must not consume alcohol, drugs or pharmaceuticals that may affect
their ability to respond.
• Only use Rexroth original accessories and spare parts in order to prevent any
hazards to persons due to improper spare parts.
• You may only start using the HYDRTRAC GFT planetary gearbox once it has been
established that the end product (see intended use of the material number-
specific operating instructions) in which the Rexroth-products are installed
complies with the country-specific provisions, safety regulations and standards of
the application.
• The assembly, commissioning, maintenance and disassembly of the HYDROTRAC
GFT planetary gearbox takes place under the responsibility of the end-product
manufacturer. Therefore, the product safety of the HYDROTRAC GFT planetary
gearbox cannot be guaranteed by Rexroth during these life phases.
• You must adhere to the technical data, operating conditions and performance
limits shown in the product documentation.
• The warranty shall apply to the delivered configuration only.
• The warranty is void in case of faulty installation, commissioning and operation, as
well as in case of improper use and/or improper handling
• You may not modify the HYDROTRAC GFT planetary gearbox in principle.
CorreCtion Copy 1 |17.10.2019 | onLy For internAL USe
RE 79094, Issue 10.2019, Bosch Rexroth AG
9/64
Hide quick links:
Table of Contents
