Product Overview; T Model - Bosch rexroth HyDrotrAC GFt Operating Instructions Manual

About this product | HyDrotrAC GFt >130 knm

5.4

5.4.1

Fig. 1: Overview of the HYDROTRAC GFT, T model planetary gearbox (the shown models are

exemplary and may differ from the supplied model).

1 HYDROTRAC GFT planetary gearbox

2 Axial-piston motor

3 Motor fastening screws

4 External brake release connection

You may set the bores 5 and 6 in the cover of the planetary gearbox to different

positions by turning the ring gear. The positioning of the bores 5 and 6 to

each other remains however fixed. Fig. 1, view B shows the possible position

of the cover only in an exemplary manner. For the exact arrangement, refer

to the planetary gearbox dimensioned drawing in the appendix D "Technical

data / Drawings" of the material number-specific operating instructions. In

the chapters 8.1.3 "Filling the planetary gearbox with lubricating oil", 10.2.2

"Checking the oil level of the planetary gearbox" and 10.4.2 "Changing the

lubricating oil", the cover is shown in the required position.

CorreCtion Copy 1 |17.10.2019 | onLy For internAL USe

5 Bore 5 (in the position shown above

for checking the lubricating oil)

6 Bore 6 (in the position shown above

for discharging the lubricating oil)

7 optional: Disconnect mechanism

RE 79094, Issue 10.2019, Bosch Rexroth AG

19/64