Table of Contents
26/64
HyDrotrAC GFt >130 knm | Assembly
procedure
CorreCtion Copy 1 |17.10.2019 | onLy For internAL USe
Bosch Rexroth AG, Issue 10.2019, RE 79094
7.1.2
Delivery in wood transport box
Overseas transports are performed mainly in closed wood transport boxes in
seaworthy packaging. The gearbox is covered with oiled paper and the bottom of the
transport box is lined with foam packaging or the planetary gearbox is packed in PE
foil.
To unpack the planetary gearbox:
1. Place the packing on a flat, stable surface.
2. Only open the packing from the top.
3. Check the scope of supply for transport damage and completeness, see chapter
4 "Scope of supply".
4. Compare material number and designation (type code) with those specified in
the order confirmation.
If the material number of the planetary gearbox does not match the one in the
order confirmation, contact the Rexroth Service for clarification. For the address,
see appendix A "Address directory" of the material number-specific operating
instructions.
5. Lift the planetary gearbox out of the packaging with suitable lifting
equipment and suitable attachment means (see chapter 6.1 "Transporting the
HYDROTRAC GFT").
6. For placing the planetary gearbox, make sure that the surface is stable.
7. Place the planetary gearbox with the cover plate down on two suitable squared
timbers. Secure the planetary gearbox against tipping over.
8. Dispose of the packaging in accordance with regulations in your local country.
7.2
inStALLAtion ConDitionS
The assembly conditions depend on the machine, the chassis frame or the
equipment frame where the planetary gearbox is integrated.
f Make sure that the chassis or equipment frame, where the HYDROTRAC GFT
planetary gearbox is attached to, is torsion resistant. The frame must be able to
withstand the weight and torque specified for the design.
f During assembly, observe by all means the operating conditions that are
specified in appendix D "Technical data / Drawings" of the material number-
specific operating instructions.
f Make sure that the work environment on site is free of dust and foreign
substances. The planetary gearbox must be installed free of contamination.
Contamination of the hydraulic fluid may considerably affect the function and
service life of the optionally supplied axial-piston motor.
f Use cloths made of lint-free fabric for cleaning.
f Use mild detergents for removing lubricants and other heavy contaminations. No
detergents may penetrate into the hydraulic system.
Hide quick links:
Table of Contents
