Table of Contents
7.3
inStALLAtion poSition
The installation position of the planetary gearbox is horizontal.
The planetary gearbox installation position approved and recommended by
Rexroth is indicated on the dimensioned drawing in appendix D "Technical data
/ Drawings" of the material number-specific operating instructions.
installation of the planetary gearbox in a non-approved rexroth mounting
position!
Damage or failure of the planetary gearbox and expiry of the warranty!
f Only install the planetary gearbox in an approved Rexroth mounting position
as indicated in the dimensioned drawing in appendix D "Technical data /
Drawings" of the material number-specific operating instructions.
Damage to the planetary gearbox through misalignment with the machine frame!
Property damage!
f Do not tilt the planetary gearbox during installation and insert it into the
machine frame torsion-free and tension-free.
f Avoid misalignment of the planetary gearbox during installation.
f Align the gearbox exactly with the machine or chassis frame.
7.3.1
operation with axial-piston motor (if included within the scope of supply)
f It is essential to observe the instructions in the operating instructions of the
axial-piston motor. For the instructions, please refer to chapter C "Mounting
parts" of the material number-specific operating instructions.
7.4
reQUireD tooLS
The planetary gearbox can be assembled with standard tools. No special tool is
required.
CorreCtion Copy 1 |17.10.2019 | onLy For internAL USe
Assembly | HyDrotrAC GFt >130 knm
NOTE
RE 79094, Issue 10.2019, Bosch Rexroth AG
27/64
Hide quick links:
Table of Contents
