Website; Homepage Id 200/C-Pdp - Bosch Rexroth ID 200/C‑PDP Manual

Start the web browser of the PC, enter the URL for the homepage ID 200/C-PDP in

the address line of the browser:

http://192.168.2.40/index.html

If the homepage is loaded for the first time, it is advisable to create a bookmark for it.

The following pages are provided by the device.

8.2.1

This overview page contains status information on the RFID system.

Displayed information:

• Firmware version of the ID 200/C-PDP

• Type and firmware version of the antennas ID 200/A-xx

• Set data carrier type per channel ("TAG type")

• Status of the connection to the antenna per channel ("Connect"):

– Connected ("HEAD CONNECTED")

– Not connected / detected ("NO HEAD CONNECTED")

– Incorrectly configured ("CONFIG ERROR") (e.g. a data carrier type which is not

suited to the antenna type)

• Status of the antenna per channel ("Operation"):

– Command currently active ("COMMAND ACTIVE")

– Command successfully completed ("COMMAND SUCCESSFUL ")

– No command active ("NO COMMAND ACTIVE")

ID 200/C-PDP web interface

3 842 540 399/2016-11, MIT: ID 200, Bosch Rexroth AG

67/84