N ot i ce of L i a bil it y While every effort has been taken the accuracy of this document, neither Bosch Security Systems Pty Ltd nor any of its official representatives shall have any liability to any person or entity with respect to any liability, loss or damage caused or alleged to be caused directly or indirectly by the information contained in this book.
“Figure 2: CM751B Module Installed On Solution 144” on page 4. If you are connecting the Figure 3: IP Config Showing Gateway and Subnet Mask CM751B to a panel which also has a CM101B Voice Mod- Bosch Security Systems 5/13 CM751BIRG FTR1.0...
Press the OK button and the assistant will begin scan- shown in “Figure 9: Uploaded Differences” on page 6. ning the private network LAN for the presence of CM751B modules. If more than one module is found, select the one from the list whose MAC address matches the one you are installing and press the OK button.
Go to the Ethernet Module section in the Devices tab and uncheck the “Obtain IP Address Automatically” option then enter the IP Address of the CM751B, the Subnet Mask and the Default Gateway in the fields provided and then save the changes.
If you attempt an IP connection with an When attempting a remote connection to a site that has a incorrect RAS security PIN then after 3 CM751B module fitted the site’s public IP address will be Note attempts to panel will lockout for the IP RAS required.
07701 (default IP RAS Port) like the CSV IP format, then you have no choice but to to the internal IP address of the CM751B which is pro- select UDP for RAS connections. UDP transactions are grammed in MENU 6-6-0 on the Solution 144.
Module IP Address 000.000.000.000 MENU 6-6-0 Subnet Mask 000.000.000.000 MENU 6-6-1 Default Gateway 000.000.000.000 MENU 6-6-2 Module MAC Address 00.00.00.00.00.00 MENU 6-6-3 Ethernet Module Options Various MENU 6-6-9 Table 1: Solution 144 Program Locations Bosch Security Systems 5/13 CM751BIRG FTR1.0...
Installer Reference Guide Module Indicators and Feedback The CM751B module includes 7 seven LED indicators which provide instant feedback during installation and commis- sioning of the module. Additional feedback is provided through the keypad and via the interactive option in Solution Link.
Network Interface: RJ45 Ethernet 10BASE-T or 100BASE-T (Auto Sensing) Encryption: 128 bit AES The CM751B mounts to the control panel PWA via the expansion port header and the 3 Module Connection: plastic standoffs provided. The HW750 Riser Kit, also included, should be used when the CM751B and CM101B Voice Module are installed on the same control panel.