Table of Contents
3.4 Warning notes in this document
In this manual, there are warning notes before the steps whenever there is a danger
of personal injury or damage to the equipment. The hazard avoidance measures
described must be observed.
Safety instructions are set out as follows:
Type and source of danger!
Consequences in case of non-compliance
Measures for the hazard avoidance
f
f
...
• Warning sign: Draws attention to the danger
• Signal word: Indicates the degree of the danger
• Type and source of danger!: Specifies the type and source of danger
• Consequences: Describes the consequences in case of non-compliance
• Precaution: Specifies how the danger can be prevented
Table 1: Risk classes according to ANSI Z535.6-2006
Warning sign, signal word
DANGER
WARNING
CAUTION
NOTICE
3.4.1
Symbols
The following symbols indicate notices which are not safety-relevant but increase the
comprehensibility of the documentation.
Table 2: Meaning of the symbols
Symbol
Meaning
If this information is not observed, the product cannot be used and/or
operated optimally.
Individual, independent action
f
1.
Numbered instruction:
The numbers indicate that the actions must be carried out one after the
2.
other.
3.
General safety instructions
SIGNAL WORD
Meaning
Indicates a dangerous situation which will cause death or
severe personal injuries if not avoided.
Indicates a dangerous situation which may cause death or
severe personal injuries if not avoided.
Indicates a dangerous situation which may cause minor or
medium personal injuries if not avoided.
Damage to property: The product or the environment could
be damaged.
3 842 540 399/2016-11, MIT: ID 200, Bosch Rexroth AG
7/84
- Quick Links:
- Address Setting
Hide quick links:
Table of Contents
