Table of Contents
Project Configurator
3–20
Exact comparison configuration/PLC:
Comparison configuration/file:
Mark components to be compared in the main
L
window.
Open "comparison" window via menu CONFIGURATION
L
COMPARE CONFIGURATION <–> PLC (EXACT).
"
Start comparison via "Start".
L
In the window "Compare" the conformities or faults are listed.
D The columns Rack Id and Mod. Id (Rack_Slot_ID) show the component
being examined.
D The columns element shows in which parameter there is a difference;
e.g. the IP address appears if differences in IP addressing are found.
D The column value (reference) shows the content of the currently dis-
played configuration file.
D The column value (target) shows the content from the network.
D The column status shows whether the content is identical or not identical.
Mark components to be compared in the main
L
window.
Open comparison window via menu CONFIGURATION
L
COMPARE CONFIGURATION <–> FILE (EXACT).
"
Select file for comparison.
L
Start comparison via "Start".
L
In the window "Compare" the conformities and faults are listed.
D The columns Rack Id and Mod. Id (Rack_Slot_ID) show the component
being examined.
D The column element shows in which parameter there is a difference; e.g.
the IP address appears if differences in IP addressing are found.
D The column value (reference) shows the content of the currently dis-
played configuration file.
D The column value (target) shows the content of the second file.
D The column status shows whether the content is identical or not identical.
COMPARE
"
COMPARE
"
1070 072 262-101 (01.09) GB
Table of Contents
