Table of Contents
Safety Instructions
1–6
CAUTION
Please comply with all ESD protection measures when using the
module! Avoid electrostatic discharges!
Please comply with the following protection measures for electrostatically
endangered modules and components (EEM)!
D The employees responsible for storage, transport and handling must be
trained in ESD protection.
D Store and transport EEMs in the specified protective packaging.
D Work with EEMs only at special ESD work stations equipped for this par-
ticular purpose.
D Employees, work surfaces and all devices and tools that could come into
contact with EEMs must be on the same potential (e.g. earthed).
D An approved earthing wrist strap must be worn. It must be connected to
the work surface via a cable with an integrated 1 MW resistor.
D EEMs must, under no circumstances, come into contact with objects sus-
ceptible to accumulating an electrostatic charge. Most items made of
plastic belong to this category.
D When installing EEMs in or removing them from an electronic device, the
power supply of the device must be switched OFF.
1070 072 262-101 (01.09) GB
Table of Contents
