Table of Contents
3.1.8
Compare
Simple comparison configuration/PLC:
1070 072 262-101 (01.09) GB
.
The function "compare" is always related to the configuration file that
is currently being processed.
D Simple comparison configuration/PLC:
Quick overview of differences between the current and actually loaded
configuration.
D Exact comparison configuration/PLC:
Precise overview of differences between the current and actually loaded
configuration.
D Comparison configuration/file:
Precise overview of differences between the current and a further con-
figuration file.
Mark components to be compared in the main
L
window.
Start comparison via menu CONFIGURATION
L
COMPARE
COMPARE CONFIGURATION
"
<–> PLC (SIMPLE) or symbol.
D All system modules existing only in the network will be marked in color.
D If the read out Rack_ID is in conformity with the Rack_ID of the configur-
ation file, the system modules with an own Rack_Slot_ID will only be in-
serted if they do not exist in the configuration file.
D If the read out Rack_Slot_IDs have already been assigned, the sys-
tem modules found are inserted in the rack using the available
Rack_Slot_IDs.
D If the found Rack_ID is not present in the configuration file, a new rack
including all system modules is added to the system.
D All components which cannot be interpreted are additionally marked
with a question mark.
D Differences between system modules existing on both sides are listed in
the status column, separated by commas.
Project Configurator
3–19
"
Table of Contents
