Table of Contents
Project Configurator
3–18
3.1.7
Unload Configuration
D In case of loading process for module: select system component,
Rack_ID and Rack_Slot_ID
D In case of loading process for selected elements: mark the component(s)
(Rack_ID, Rack_Slot_ID) the loading process is performed for in the
main window of the project configurator.
Load current configuration via symbol.
L
The configuration can be read out from a controllers group of CL550 system
modules located in a logical network. Via "broadcast", the IP addresses, the
configuration file and all Ethernet parameters as well as the status of each
responding system module are read out.
Start unloading via menu CONFIGURATION
L
Enter name of the configuration
L
file in the dialog box. A configur-
ation file is overwritten or a new
configuration file is created in
accordance with the entered file
names.
Unload configuration via symbol.
L
.
It is not possible to check completeness, because via "broadcast" only
the system modules in operation and located in the same subnetwork
will respond.
Mark
UNLOAD
"
1070 072 262-101 (01.09) GB
Table of Contents
