Dynojet POWER COMMANDER V Installation Instructions page 4

For 2013 arctic cat 700cc h1 atv

Hide thumbs Also See for POWER COMMANDER V:

FIG.D

FIG.E

TPS

I11-014.01

www.powercommander.com

posi-tap

Disconnect the stock wiring harness from the injector as shown in Figure D.

Attach the PCV connectors to the stock wiring harness and the injector.

Locate the Throttle Position Sensor (TPS) on the

left hand side of the throttle body.

Using the supplied posi-tap, attach the grey wire

from the PCV to the green/black wire from the

TPS.

Replace the storage bin, cover, tool kit, side panel,

and seat.

Insert the cd provided into your computer's cd-rom

drive and follow the on-screen instructions to install

the PCV software. Visit www.powercommander.

com to download software tutorials.

2013 Arctic Cat 700cc H1 ATV - PCV - 4