Dynojet POWER COMMANDER V Installation Instructions
  1. Manuals
  2. Brands
  3. Dynojet Manuals
  4. Automobile Accessories
  5. Power commander V
  6. Installation instructions
Dynojet POWER COMMANDER V Installation Instructions

Dynojet POWER COMMANDER V Installation Instructions

For 2013 arctic cat 700cc h1 atv
Hide thumbs Also See for POWER COMMANDER V:
1
2
3
4

Quick Links

2013 Arctic Cat 700cc H1 ATV
I n s t a l l a t i o n I n s t r u c t i o n s
PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION
I11-014.01
www.powercommander.com
2191 Mendenhall Drive North Las Vegas, NV 89081 (800) 992-4993 www.powercommander.com
PARTS LIST
1
Power Commander
1
USB Cable
1
CD-ROM
1
Installation Guide
2
Power Commander Decals
2
Dynojet Decals
1
Posi-tap
2
Velcro
1
Alcohol swab
THE IGNITION MUST BE TURNED
OFF BEFORE INSTALLATION!
YOU CAN ALSO DOWNLOAD THE
POWER COMMANDER SOFTWARE AND
LATEST MAPS FROM OUR WEB SITE AT:
www.powercommander.com
2013 Arctic Cat 700cc H1 ATV - PCV - 1
loading

Related Manuals for Dynojet POWER COMMANDER V

Summary of Contents for Dynojet POWER COMMANDER V

  • Page 1 2013 Arctic Cat 700cc H1 ATV Installation Guide I n s t a l l a t i o n I n s t r u c t i o n s Power Commander Decals Dynojet Decals Posi-tap Velcro Alcohol swab...
  • Page 2 Control Center Software. Crank Do not connect anything to this port unless instructed to do so by Dynojet. It is used to PCV Wire Connections transfer crank trigger data from one module to another.
  • Page 3 FIG.A Remove the seat and left hand side panel as shown in Figure A. FIG.B remove Remove the storage cover and storage bin as shown in Figure B. Loosen the clamp from the throttle body and remove the air snorkel from the throttle body as shown in Figure C.
  • Page 4 FIG.D Disconnect the stock wiring harness from the injector as shown in Figure D. Attach the PCV connectors to the stock wiring harness and the injector. Locate the Throttle Position Sensor (TPS) on the FIG.E left hand side of the throttle body. Using the supplied posi-tap, attach the grey wire from the PCV to the green/black wire from the TPS.