Table of Contents
14/14
VT-HNC100.../S | Digital drive controller
Project planning / maintenance instructions / additional information
Product documentation for VT-HNC100...3X/S
Product information 09956
Data sheet 30159
Operating instructions 30159-B
Functional description 30159-FK
Parameter description 30159-PA
Environmental compatibility statement 30139-U
Commissioning software and documentation on the Internet: www.boschrexroth.com/HNC100
Maintenance instructions:
▶ The devices have been tested in the plant and are supplied with default settings.
▶ Only complete units can be repaired. Repaired devices are returned with default settings. User-specifi c settings
are not accepted. The user must transfer all appropriate user parameters and programs again.
Notices:
▶ The VT-HNC100...3X/S does not support rotary drives
▶ Electric signals taken out via control electronics (e.g. "No error" signal) must not be used for switching safety-
relevant machine functions! (See also the European standard "Safety requirements for fl uid power systems and
their components - Hydraulics", EN 982.)
▶ If electro-magnetic interference is to be anticipated, suitable measures must be taken to ensure the function
(depending on the application, e.g. shielding, fi ltration)!
In order to satisfy the requirements of the CE mark, a cable of category 7 (cat. 7 according to ISO/IEC 11801)
must be used for the sercos III communication.
▶ The upper and lower ventilation slots must not be concealed by adjacent units in order to provide for suffi -
cient cooling.
Bosch Rexroth AG
Hydraulics
Zum Eisengießer 1
97816 Lohr am Main, Germany
Phone +49 (0) 93 52 / 18-0
www.boschrexroth.de
Bosch Rexroth AG, RE 30159, edition: 2012-03
© This document, as well as the data, specifi cations and other information set
forth in it, are the exclusive property of Bosch Rexroth AG. It may not be repro-
duced or given to third parties without its consent.
The data specifi ed above only serve to describe the product. No statements
concerning a certain condition or suitability for a certain application can be
derived from our information. The information given does not release the user
from the obligation of own judgment and verifi cation. It must be remembered
that our products are subject to a natural process of wear and aging.
Hide quick links:
Table of Contents
