Table of Contents
6 Analysis software
6.2 Software operation
6.2.3 Band detection
6.2.3
Band detection
Description
This is the third step of the analysis workflow. The options for band detection are present-
ed next to the image.
Bands can be detected automatically and/or manually. However, manual bands can
only be added in single channel view. Bands modified manually are highlighted in the
image.
The bands resulting from multichannel imaging are color marked in the image or lane
profile according to the detection channel used. For example, a band detected in the
green channel is displayed with a green frame, etc.
Detecting bands
Follow the instructions below to detect bands.
Step
1
2
198
Action
Select the Detect button to detect the bands automatically.
Tip:
Shift between lane profile, image view, and image tabs to verify the result of
the band detection.
If the band detection is satisfactory, then proceed to the final step in this
table.
If too many bands are detected, then use the Sensitivity minus button to
decrease the sensitivity.
If too few bands are detected, then use the Sensitivity plus button to increase
the sensitivity.
Amersham Imager 600 Operating Instructions 29-0645-17 AD
Hide quick links:
Table of Contents
