Startup
14
Preliminary work and resources
14.2
Preliminary work and resources
650
System Manual – MOVIDRIVE
•
Check the installation.
•
Performing startup with the DBG60B keypad:
WARNING
Risk of crushing if the motor starts up unintentionally.
Severe or fatal injuries.
•
Ensure that the motor cannot start inadvertently, for example, by removing the
electronics terminal block X13.
•
Additional safety precautions must be taken depending on the application to
avoid injury to people and damage to machinery.
•
Performing startup with the DBG60B keypad:
Plug the connector of the DBG60B keypad into the XT slot.
•
For startup using a PC and MOVITOOLS
Plug an interface adapter (e.g. USB11A) into the XT slot and connect it to the PC with
an interface cable (RS232). Install and start MOVITOOLS
•
Switch on the supply voltage and, if necessary, the DC 24 V supply.
•
Check that the default parameter settings are correct (e.g. factory setting).
•
Check the set terminal assignment (→ P60_ / P61_).
INFORMATION
A group of parameter values is changed automatically at startup.
®
MDX60B/61B
®
MotionStudio:
®
MotionStudio on your PC.