Table of Contents
4
ArmorPoint 24V dc Output Modules, Series A
Mount the I/O Base
Publication 1738-IN001A-EN-E - June 2004
ATTENTION
To mount the ArmorPoint I/O base on a wall or panel, use the screw
holes provided in the ArmorPoint base.
IMPORTANT
A mounting illustration for the ArmorPoint base with an adapter is
shown below.
Adapter
4.02 in.
102 mm
1.81 in.
46 mm
Preventing Electrostatic Discharge
This equipment is sensitive to electrostatic discharge,
which can cause internal damage and affect normal
operation. Follow these guidelines when you handle
this equipment:
• Touch a grounded object to discharge potential
static.
• Wear an approved grounding wriststrap.
• Do not touch connectors or pins on component
boards.
• Do not touch circuit components inside the
equipment.
• If available, use a static-safe workstation.
• When not in use, store the equipment in
appropriate static-safe packaging.
The ArmorPoint I/O module must be mounted on a
grounded metal mounting plate or other conductive
surface.
1.9 in.
2.0 in.
0.87 in.
47.2 mm
50 mm
22 mm
2.0 in.
0.87 in.
2.0 in.
50 mm
22 mm
50 mm
43769
Hide quick links:
Table of Contents
